GW Instek GDS-200 Series Programming Manual - Manual (Page 120)

GDS-200 & GDS-300 Programming Manual
120
:GONogo:SOURce
Description Sets the source for the Go/NoGo signal.
Syntax :GONogo:SOURce {CH1|CH2|?}
Parameter/
Return Parameter CH1~CH2
Example :GONogo:SOURce CH1
Sets the source to CH1.
:GONogo:VIOLation
Description Sets or returns actions for the Go/NoGo violations.
Syntax :GONogo:VIOLation
{STOP|STOP_Beep|CONTinue|CONTINUE_Beep|?}
Parameter/
Return Parameter STOP The waveform will be frozen.
STOP_Beep The waveform will be frozen and
a beep will be output.
CONTinue Ignore the violation.
CONTINUE_Beep Output a beep, but continue to
monitor the signal.
Example :GONogo:VIOLation STOP
Sets violation action to STOP.
:GONogo:MODe
Description Turns Go-NoGo on or off or returns its state.
Syntax :GONogo:MODe {OFF | ON | ? }
Parameter/
Return Parameter OFF Turns Go-NoGo mode off
ON Turns Go- NoGo mode on
Example :GONogo:MODe ON
Turns Go-NoGo mode on.
Set
Query
Set
Query
Set
Query