Measure:frequency, Measure:period – GW Instek GDS-200 Series Programming Manual User Manual
Page 69
COMMAND DETAILS
69
Example
:MEASure:SOURce1 CH1
:MEASure:FPReshoot?
Selects Channel 1, and then measures the fall
preshoot.
:MEASure:FREQuency
Description
Returns the frequency value.
Syntax
:MEASure:FREQuency?
Related
Commands
:MEASure:SOURce
Return parameter
Returns the frequency in Hz.
Chan Off
Indicates the source channel is not
activated.
Note
Before using this command, select the
measurement channel. See the example below.
Example
:MEASure:SOURce1 CH1
:MEASure:FREQuency?
1.0E+3
Selects Channel 1, and then measures the
frequency.
:MEASure:PERiod
Description
Returns the period.
Syntax
:MEASure:PERiod?
Related
Commands
:MEASure:SOURce
Return parameter
Returns the period.
Chan Off
Indicates the source channel is not
activated.
Query
Query