GW Instek GDS-200 Series Programming Manual - Manual (Page 56)

GDS-200 & GDS-300 Programming Manual
56
:DISPlay:BRIGHTness
Description Sets or queries the screen brightness.
Syntax :DISPlay:BRIGHTness { | ? }
Parameter 0.0E+0 to 1.0E+2 (0% to 100%)
Return Parameter Returns the brightness.
Example :DISPlay:BRIGHTness 100
Sets the brightness to 100%.
:DISPlay:ECO
Description Sets or queries ECO mode status.
Syntax :DISPlay:ECO {ON | OFF| ?}
Parameter ON Turns on the ECO mode.
OFF Turns off the ECO mode.
Return parameter Returns ON or OFF
Example :DISPlay:ECO ON
Turns the ECO mode on.
:DISPlay:ECO:TIMe
Description Sets or queries ECO time setting. The ECO mode
dims the display after a set amount of time.
Syntax :DISPlay:ECO:TIMe {| ?}
Parameter 1, 2, 5, 10, 30 minutes
Return parameter Returns the ECO time
Example :DISPlay:ECO:TIMe 10
Sets the ECO mode to minutes.
Set
Query
Set
Query
Set
Query