GW Instek GDS-200 Series Programming Manual - Manual (Page 129)

COMMAND DETAILS
129
OHM Resistance measurement mode
DIODE Diode tester
BEEP Continuity tester
TEMPerature Temperature measurement mode
Example :DMM:MOD DCV
Sets the measurement mode to DCV.
:DMM:TRENDplot
Description Resets the DMM trend plot.
Syntax :DMM:TRENDplot {RESET}
Example :DMM:TRENDplot RESET
:DMM:ADVanced
Description Turns the advanced function on or off or returns
its status.
Syntax :DMM:ADVanced { ON | OFF | ?}
Parameter/Return
parameter ON Turn Advanced DMM function on.
OFF Turn Advanced DMM function off.
Example :DMM:ADVanced ON
Turns the Advanced DMM function on.
:DMM:TIMe
Description Sets or queries the interval time for the trend plot
data.
Syntax :DMM:TIMe
{TIME40S|TIME3M|TIME6M|TIME15M|TIME30M|TI
ME1H|TIME3H|TIME6H}
Parameter/Return TIME40S
Set
Set
Query
Set
Query