GW Instek GDS-200 Series Programming Manual - Manual (Page 128)

GDS-200 & GDS-300 Programming Manual
128
Related
commands :MEASUrement:DISPlay
Return parameter Returns the measurement or value on
the display as a string.
Example :DMM:VALue?
0.000
Returns the value on the DMM display.
:DMM:HOLD
Description Sets or queries the Hold function status.
Syntax :DMM:HOLD { ON | OFF | ?}
Parameter/Return
parameter ON Turns the Hold function on.
OFF Turns the Hold function off.
Example :DMM:HOLD ON
Turns the Hold function on.
:DMM:MOD
Description Sets or queries the DMM mode.
Syntax :DMM:MOD
{ DCV | DCMV | ACV | ACMV | DCA | DCMA | ACA |
ACMA | OHM | DIODE | BEEP | TEMPerature | ?}
Parameter/Return
parameter DCV DCV mode
DCMV DCMV mode
ACV ACV mode
ACMV ACMV mode
DCA DCA mode
DCMA DCMA mode
ACA ACA mode
ACMA ACMA mode
Set
Query
Set
Query