GW Instek GDS-200 Series Programming Manual - Manual (Page 53)

COMMAND DETAILS
53
Display Commands
:DISPlay:INTensity:WAVEform ................................... 53
:DISPlay:INTensity:GRATicule.................................... 53
:DISPlay:PERSistence ................................................. 54
:DISPlay:GRATicule .................................................... 54
:DISPlay:WAVEform .................................................... 54
:DISPlay:OUTPut ........................................................ 55
:DISPlay:BRIGHTness ................................................ 56
:DISPlay:ECO .............................................................. 56
:DISPlay:ECO:TIMe ..................................................... 56
:DISPlay:INTensity:WAVEform
Description Sets or queries the waveform intensity level.
Syntax :DISPlay:INTensity:WAVEform { | ?}
Parameter 0.0E+0 to 1.0E+2 (0% to 100%)
Return Parameter Returns the display intensity.
Example :DISPlay:INTensity:WAVEform 5.0E+1
Sets the waveform intensity to 50%.
:DISPlay:INTensity:GRATicule
Description Sets or queries the graticule intensity level.
Syntax :DISPlay:INTensity:GRATicule { | ?}
Parameter 0.0E+0 to 1.0E+2 (0% to 100%)
Return Parameter Returns the graticule intensity.
Example :DISPlay:INTensity:GRATicule 5.0E+1
Sets the graticule intensity to 50%.
Set
Query
Set
Query