GW Instek GDS-200 Series Programming Manual - Manual (Page 45)

COMMAND DETAILS
45
HV Turns horizontal and vertical cursors on.
Return parameter Returns the state of the cursors (H, HV, OFF).
Example :CURSor:MODe OFF
Turns the cursors off.
:CURSor:SOURce
Description Sets or queries the cursor source.
Syntax :CURSor:SOURce {CH1 | CH2 | REF1 | REF2 | MATH |
| ?}
Parameter CH1~CH2 Channel 1 to 2
REF1~2 Reference waveform 1 to 2
MATH Math source
Return parameter Returns the cursor source.
Example :CURSor:SOURce CH1
Turns the cursor source as channel 1.
:CURSor:HUNI
Description Sets or queries the units for the horizontal bar
cursors.
Syntax :CURSor:HUNI {SEConds | HERtz | ?}
Related
Commands :CURSor:MODe
Parameter SEConds Sets the cursor units to time in seconds.
HERtz Sets the cursor units to frequency.
Return parameter Returns the unit type.
Example :CURSor:HUNI SEConds
Sets the units to time in seconds.
Set
Query
Set
Query