GW Instek GDS-200 Series Programming Manual - Manual (Page 64)

GDS-200 & GDS-300 Programming Manual
64
:MEASure:CMEan
Description Returns the mean voltage/current of one full
period.
Syntax :MEASure:CMEan?
Related
Commands :MEASure:SOURce
Return parameter Returns the cyclic mean.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:CMEan?
9.480E-01
Selects Channel 1, and then measures the mean
value of the first period.
:MEASure:RMS
Description Returns the root-mean-square voltage/current of
one or more full periods.
Syntax :MEASure:RMS?
Related
Commands :MEASure:SOURce
Return parameter Returns the RMS value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Query
Query