GW Instek GDS-200 Series Programming Manual - Manual (Page 100)

GDS-200 & GDS-300 Programming Manual
100
:TRIGger:EDGe:SLOP
Description Sets or queries the trigger slope.
Syntax :TRIGger:EDGe:SLOP {RISe | FALL | EITher | ? }
Related
commands :TRIGger:TYPe
Parameter RISe Rising slope
FALL Falling slope
EITher Either rising or falling slope
Return parameter Returns the trigger slope.
Example :TRIGger:EDGe:SLOP FALL
Sets the trigger slope to falling.
:TRIGger:PULSEWidth:POLarity
Description Sets or queries the pulse width trigger polarity.
Syntax :TRIGger:PULSEWidth:POLarity {POSitive | NEGative
| ?}
Related
commands :TRIGger:TYPe
Parameter POSitive Positive polarity
NEGative Negative polarity
Return parameter Returns the pulse width polarity.
Example :TRIGger:PULSEWidth:POLarity POSitive
Sets the pulse width polarity to positive.
:TRIGger:VIDeo:TYPe
Description Sets or queries the video trigger type.
Syntax :TRIGger:VIDeo:TYPE {NTSC | PAL | SECam | ?}
Set
Query
Set
Query
Set
Query