GW Instek GDS-200 Series Programming Manual - Manual (Page 66)

GDS-200 & GDS-300 Programming Manual
66
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:AREa?
1.958E-03
Selects Channel 1, and then measures the area.
:MEASure:CARea
Description Returns the voltage/current area over one full
period.
Syntax :MEASure:CARea?
Related
Commands :MEASure:SOURce
Return parameter Returns the area value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:CARea?
1.958E-03
Selects Channel 1, and then measures the area.
:MEASure:ROVShoot
Description Returns the rising overshoot over the entire
waveform in percentage.
Syntax :MEASure:ROVShoot?
Query
Query