GW Instek GDS-200 Series Programming Manual - Manual (Page 71)

COMMAND DETAILS
71
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FALL?
Selects Channel 1 as the source, and then measures
the fall time.
:MEASure:PWIDth
Description Returns the first positive pulse width.
Syntax :MEASure:PWIDth?
Related
Commands :MEASure:SOURce
Return parameter Returns the positive pulse width.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PWIDth?
5.0E-6
Selects Channel 1, and then measures the positive
pulse width.
:MEASure:NWIDth
Description Returns the first negative pulse width timing.
Syntax :MEASure:NWIDth?
Related
Commands :MEASure:SOURce
Return parameter Returns the negative pulse width in
seconds.
Query
Query