GW Instek GDS-200 Series Programming Manual - Manual (Page 112)

GDS-200 & GDS-300 Programming Manual
112
:SAVe:WAVEform:NOTE
Description When a waveform is saved, this command saves a
note (*.TXT) with the same base filename as the
waveform that was saved.
Syntax :SAVE:WAVEform:NOTE {}
Parameter Max. 50 character string enclosed in
double quotes.
Example :SAVE:WAVEform:NOTE “This is a note.”
Saves the note the next time a waveform file is
saved.
:SAVe:ALL
Description Saves all the displayed waveforms, reference and
math waveforms, a screenshot of the display and
the current setup to a designated file path on the
internal disk.
Related
commands :SAVe:ALL
Syntax :SAVe:ALL
Parameter Saves the waveform(s) to specified file
path on the internal disk.
Example 1 :SAVe:ALL “Disk:/ALL0001”
Saves to a directory named ALL0001.
:SAVe:ALL:NOTE
Description When the SAVe:ALL command is used, this
command saves a note (*.TXT) with the same base
filename as the directory in which everything was
saved.
Syntax :SAVE:ALL:NOTE {}
Set
Set
Set