GW Instek GDS-200 Series Programming Manual - Manual (Page 77)

COMMAND DETAILS
77
:MEASure:FFFDelay
Description Returns the delay between the first falling edge of
source1 and the first falling edge of source2.
Syntax :MEASure:FFFDelay?
Related
Commands :MEASure:SOURce
Return parameter Returns the delay.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:FFFDelay?
-8.89E-6
Select channel 1 and 2 as delay source1/2, and
then measure FFF.
:MEASure:LRRDelay
Description Returns the delay between the first rising edge of
source1 and the last rising edge of source2.
Syntax :MEASure:LRRDelay?
Related
Commands :MEASure:SOURce
Return parameter Returns the delay.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Query
Query