GW Instek GDS-200 Series Programming Manual - Manual (Page 73)

COMMAND DETAILS
73
Related
Commands :MEASure:SOURce
Return parameter Returns the number of positive pulses.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PPULSE?
6.000E+00
Selects Channel 1, and then measures the number
of positive pulses.
:MEASure:NPULSE
Description Returns the number of negative pulses.
Syntax :MEASure:NPULSE?
Related
Commands :MEASure:SOURce
Return parameter Returns the number of negative pulses.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:NPULSE?
4.000E+00
Selects Channel 1, and then measures the number
of negative pulses.
Query