GW Instek GDS-200 Series Programming Manual - Manual (Page 62)

GDS-200 & GDS-300 Programming Manual
62
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:AMPlitude?
3.76E-3
Selects Channel 1, and then measures the
amplitude.
:MEASure:HIGH
Description Returns the high voltage/current.
Syntax :MEASure:HIGH?
Related
Commands :MEASure:SOURce
Return parameter Returns the high value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:HIGH?
3.68E-3
Selects Channel 1, and then measures the high
voltage/current.
:MEASure:LOW
Description Returns the low voltage/current.
Syntax :MEASure:LOW?
Query
Query