Measure:rpreshoot, Measure:fpreshoot – GW Instek GDS-200 Series Programming Manual User Manual
Page 68

GDS-200 & GDS-300 Programming Manual
68
:MEASure:RPReshoot
Description
Returns rising preshoot over the entire waveform
in percentage.
Syntax
:MEASure:RPReshoot?
Related
Commands
:MEASure:SOURce
Return parameter
Returns the rising preshoot.
Chan Off
Indicates the source channel is not
activated.
Note
Before using this command, select the
measurement channel. See the example below.
Example
:MEASure:SOURce1 CH1
:MEASure:RPReshoot?
2.13E-2
Selects Channel 1, and then measures the rise
preshoot.
:MEASure:FPReshoot
Description
Returns fall preshoot amplitude.
Syntax
:MEASure:FPReshoot?
Related
Commands
:MEASure:SOURce
Returns
Returns the fall preshoot as
Return parameter
Returns the fall preshoot as a percentage.
Chan Off
Indicates the source channel is not
activated.
Note
Before using this command, select the
measurement channel. See the example below.
Query
Query