GW Instek GDS-200 Series Programming Manual - Manual (Page 110)

GDS-200 & GDS-300 Programming Manual
110
:SAVe:SETUp:NOTE
Description When a setup file is saved, this command saves a
note (*.TXT) with the same base filename as the
setup file that was saved.
Syntax :SAVe:SETUp:NOTE {}
Parameter “String” Max. 50 character string enclosed in
double quotes.
Example :SAVE:SETUp:NOTE “This is a note.”
Saves the note the next time an image is saved and
the brief mode is turned on.
:SAVe:WAVEform
Description Saves a waveform to internal memory or to a
designated file path.
Related
commands :SAVe:WAVEform:FILEFormat
Syntax :SAVe:WAVEform {CH1~REF2, REF } |
{CH1~REF2, W1~W20} | {CH1~ALL, file path}
Parameter CH1~REF2, CH1~CH2, Math, REF1~2
1,2 (REF1, REF2)
W1~W20 Wave1~Wave20
ALL All the displayed waveforms on screen.
File path Saves the waveform(s) to specified file
path on the internal disk.
Example 1 :SAVe:WAVEform CH1, REF2
Saves the channel1 waveform to REF2.
Set
Set