GW Instek GDS-200 Series Programming Manual - Manual (Page 60)

GDS-200 & GDS-300 Programming Manual
60
:MEASure:PK2PK
Description Returns the peak-to-peak amplitude (difference
between maximum and minimum amplitude).
Syntax :MEASure:PK2Pk?
Related
Commands :MEASure:SOURce
Return parameter Returns the voltage or current peak to
peak measurement.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PK2Pk?
2.04E-1
Selects Channel 1, and then measures the peak-to-
peak amplitude.
:MEASure:MAX
Description Returns the maximum amplitude.
Syntax :MEASure:MAX?
Related
Commands :MEASure:SOURce
Return parameter Returns the maximum amplitude.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Query
Query