GW Instek GDS-200 Series Programming Manual - Manual (Page 78)

GDS-200 & GDS-300 Programming Manual
78
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
: MEASure:LRRDelay?
-8.89E-6
Select channel 1 and 2 as delay source1/2, and
then measure LRR.
:MEASure:LRFDelay
Description Returns the delay between the first rising edge of
source1 and the last rising edge of source2.
Syntax :MEASure:LRFDelay?
Related
Commands :MEASure:SOURce
Return parameter Returns the delay.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:LRFDelay?
-4.99E-6
Select channel 1 and 2 as delay source1/2, and
then measure LRF.
:MEASure:LFRDelay
Description Returns the delay between the first falling edge of
source1 and the last rising edge of source2.
Syntax :MEASure:LFRDelay?
Related
Commands :MEASure:SOURce
Query
Query