GW Instek GDS-200 Series Programming Manual - Manual (Page 29)

COMMAND DETAILS
29
Parameter SAMPle Sample mode sampling
PDETect Peak detect sampling
AVERage Average sampling mode
Example :ACQuire:MODe PDETect
Sets the sampling mode to peak detection.
:ACQuire:MEMory?
Description Returns the data in acquisition memory for the
selected channel as a header + raw data.
Syntax :ACQuire:MEMory?
Related
Commands ACQuire:RECOrdlength
:HEADer
Parameter Channel number (1 to 2)
Example :ACQuire1:MEMory?
Format,0.20;Memory Length,
10000;IntpDistance,0;Trigger Address,5229;Trigger
Level,4.000E-01;Source,CH1;Vertical Units,V;
Vertical Units Div,0;Vertical Units Extend Div,15;
Label, ;Probe Type,0;Probe
Ratio,1.000e+00;Vertical Scale,2.000e+00;Vertical
Position,3.600e-00;Horizontal Units,S;Horizontal
Scale,5.000E-04;Horizontal Position,0.000E+00;
Horizontal Mode,Main;SincET Mode,Real
Time;Sampling Period,4.000e-07;Horizontal Old
Scale,5.000E-04;Horizontal Old Position,0.000E+00;
Firmware,V0.42;Time,05-May-14 12:25:17;
Waveform Data;
#520000
:ACQuire:STATe?
Description Returns the status of waveform data.
Syntax :ACQuire:STATe?
Query
Query