GW Instek GDS-200 Series Programming Manual - Manual (Page 25)

COMMAND DETAILS
25
HORizontal OFF;TRIGger OFF;MEASUrement OFF;CURSor
OFF;CURSor:MEASure OFF;:BUZZER OFF
*OPC
Description The *OPC command sets the OPC bit (bit0) of the
Standard Event Status Register when all current
commands have been processed.
The *OPC? Query returns 1 when all the
outstanding commands have completed.
Syntax *OPC, *OPC?
Return parameter 1 Returns 1 when all the outstanding
commands have completed.
Example *OPC?
>1
*RCL
Description Recalls a panel setup.
Syntax *RCL {1 | 2 | 3 |…. | 20}
Example *RCL 1
Recalls the setup from Set 1.
*RST
Description Resets the GDS-200/300 (recalls the default panel
settings).
Syntax *RST
*SAV
Description Saves the current panel setup to the selected setup
number file number.
Syntax *SAV {1 | 2 | 3 |…. | 20}
Set
Query
Set
Set
Set