Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 982)

952 Fabric OS Command Reference
53-1003131-01
portSwapEnable
2
portSwapEnable
Enables the PortSwap feature.
SYNOPSIS
portswapenable
DESCRIPTION
Use this command to enable the PortSwap feature. The portSwap command cannot be used unless the
feature is first enabled with this command.
The enabled state of the PortSwap feature is persistent across reboots and power cycles.
Enabling or disabling the PortSwap feature does not affect previously performed PortSwap operations.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To enable the PortSwap feature:
switch:admin> portswapenable
SEE ALSO
portSwap , portDisable , portEnable , portShow , portSwapDisable , portSwapShow , switchShow