beautypg.com

Configurechassis – Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual

Page 197

background image

Fabric OS Command Reference

167

53-1003131-01

configureChassis

2

configureChassis

Changes chassis-level system configuration settings.

SYNOPSIS

configurechassis

DESCRIPTION

Use this command to modify chassis-level system configuration settings.

Configuration data is grouped into chassis information and switch information. Each configuration type is
managed separately.

Use the configure command to modify switch configuration parameters. Use the configureChassis
command to modify the following chassis configuration parameters:

Cfgload attributes

Custom Attributes

System settings

fos attributes

This command requires chassis permissions in both Virtual Fabric and non-Virtual Fabric environments.

The configureChassis command interactively presents a hierarchical menu. Each top-level heading
and its associated subheadings consist of a text prompt, a selection of valid values, and a default value
(in brackets).

The following keys control the execution of the command:

Return

When entered at a prompt with no preceding input, the command accepts the
default value (if applicable) and moves to the next prompt.

Interrupt (Ctrl-C)

Aborts the command immediately and ignores all changes made.

End-of-file (Ctrl-D)

When entered at a prompt with no preceding input, terminates the command and
saves changes made.

The following parameters can be modified with the configureChassis command:

Cfgload Attributes

Configures configuration upload and download parameters.

Enforce secure Config Upload/Download

Enables (yes) or disables (no) secure configuration upload or download. The
default value is "no.

Enforce signature validation for firmware

Enables (yes) or disables (no) signature validation enforcement. By default, this
feature is disabled (no).

Add Suffix to the uploaded file name

Appends a suffix to the uploaded configuration file. The suffix includes the chassis
name and a time stamp in the yyymmdd_hhmmss format. Refer to the example
section for an illustration. This feature is disabled by default.

Enable auto firmwaresync

Enables the firmware from the active CP to synchronize automatically to the
standby CP.