Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1003)

Fabric OS Command Reference 973
53-1003131-01
portZoneShow
2
portZoneShow
Displays the enforced zone type of the F_Ports and FL_Ports of a switch.
SYNOPSIS
portzoneshow
DESCRIPTION
Use this command to display the enforced zone type of the F_Ports and FL_Ports of a switch.
Output shows virtual port number (decimal), physical port number (decimal), online status, and if online,
port type. If the current zone configuration has been disabled by cfgDisable, the fabric is in non-zoning
mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No
Effective configuration: (No Access)" is displayed.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display the zone membership information of ports:
switch:user> portzoneshow
[OUTPUT TRUNCATED]
PORT: 160 (160) Offline
PORT: 161 (161) Offline
PORT: 162 (162) Offline
PORT: 163 (163) Offline
PORT: 164 (164) Offline
PORT: 165 (165) Offline
PORT: 166 (166) Offline
PORT: 167 (167) Offline
PORT: 168 (168) FL-Port Enforcement: HARD WWN \
defaultHard: 0 IFID: 0x4332000a
PORT: 169 (169) Offline
PORT: 170 (170) Offline
PORT: 171 (171) Offline
PORT: 172 (172) Offline
PORT: 173 (173) Offline
PORT: 174 (174) Offline
PORT: 175 (175) Offline
PORT: 176 (176) F-Port Enforcement: HARD WWN \
defaultHard: 0 IFID: 0x4342002a
PORT: 177 (177) Offline
PORT: 178 (178) Offline
PORT: 179 (179) Offline
PORT: 180 (180) Offline
(output truncated)
SEE ALSO
cfgShow , switchShow