Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 412)

382 Fabric OS Command Reference
53-1003131-01
ficonShow
2
Incident Count
Displays the incident count. This number increases by 1 for each incident within
the individual switch.
Link Incident Description
Same as Link Incident Type.
Link Incident Type
Indicates the link incident type as one of the following:
• Bit-error-rate threshold exceeded
•
Loss of signal or synchronization
• NOS recognized
• Primitive sequence timeout
•
Invalid primitive sequence for port state
Listener PID
Same as PID.
Listener Port Type
Same as Port Type.
Listener Port WWN
Displays the channel HBA port world wide name.
Listener Type
Indicates the listener type as follows:
Conditional
This port receives a link incident record if no other recipients from the established
registration list have been chosen.
Unconditional
This port is always chosen as a recipient of a link incident record.
Manufacturer
Displays the manufacturer name or code.
Model Number
Displays the model number.
Node Parameters
Same as Parameters.
Parameters
Displays the node type for the switch in three bytes, 0xAABBCC:
Byte AA 0x20
FC-SB-2 and updates
Byte BB 0x0a
Switch
Byte CC 0x00
Port number. It is dynamically assigned whenever a link incident occurs.
Parm
Displays the incident node parameters type in three bytes, 0xAABBCC:
Byte AA
Possible values include the following:
0x00
Reserved.
0x20
FC-SB-2 and updates.