Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 241)

Fabric OS Command Reference 211
53-1003131-01
cryptoCfg
2
•
Number of rekey sessions in progress: numeric value
• For each rekey session the display includes the following parameters:
- Rekey session number: numeric value
- Percent completion: numeric value
-
Rekey state. Displays one of the following parameters:

Rekey Setup
 LUN Prep
 Key Update
- Operation in progress. Displays one of the following parameters:

Read Phase
 Write Phase
 HA Sync Phase
 LUN Cleanup
- VI: virtual initiator port WWN and node WWN
- VI PID: virtual initiator PID
- Number of blocks: numeric value
-
Block size: numeric value (in KB)
-
Size of the LUN (in bytes)
- Current logical block address (LBA) being processed
- Rekey Role: Primary Or Backup
Use the --show -tape_sessions command to display all tape sessions in progress on the local node or
for a specific container. The display includes the following information:
• Number of tape sessions in progress: numeric value
• Container name: user-defined label
•
EE node name: node WWN
•
EE Slot Number: slot number
• Target: target port WWN and node WWN
• Target PID: Target PID
• VT: virtual target port WWN and node WWN
•
VT PID: virtual target PID
•
Host: host port WWN and node WWN
•
Host PID: host PID
• VI: virtual initiator port WWN and node WWN
• VI PID: virtual initiator PID
• LUN number: numeric identifier
•
Tape session number: numeric identifier
•
For each Tape session:
- Number of uncompressed blocks: numeric value
- Number of compressed blocks: numeric value
- Number of uncompressed bytes: numeric value
- Number of compressed bytes: numeric value