Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 819)

Fabric OS Command Reference 789
53-1003131-01
portCfgShow
2
portCfgShow
Displays port configuration settings.
SYNOPSIS
portcfgshow
portcfgshow [slot/]port
portcfgshow -i [ndex1[-index2] [...] [-f]]
portcfgshow -slotslot1[-slot2] [...]
portcfgshow [option] [slot/]ge_port
portcfgshow [fciptunnel | fcipcircuit]
[all | [slot/]veport] [optional_argument]
portcfgshow ipsec-policy
DESCRIPTION
Use this command to display the current configuration of a port. The behavior of this command is
platform-specific; output varies depending on port type and platform, and not all options are supported on
all platforms.
Non-GbE port displays
When used without operands, this command displays port configuration settings for all ports on a switch,
except Gigabit Ethernet (GbE) ports.
Displays supported only on the Brocade 7800, Brocade 7840 switches and FX8-24 blade
Use this command with optional arguments to display the following parameters configured for a GbE port
on the Brocade 7800, Brocade 7840, and FX8-24 platforms.
•
IP interfaces on the GbE port
•
Static routes on the IP interfaces
•
Address resolution protocol (ARP) entries
• VLAN tag configuration
• Fibre Channel over IP (FCIP) tunnel configuration settings
• IPSec configuration
• Inband Management IP addresses and routes.
•
Display IPsec policy. Currently supported on the Brocade 7840 only.
Non-GbE port displays
The following information is displayed when the command is issued for all ports, for a single port, or for
one or more port ranges specified by their port index numbers or slot numbers:
Area Number
Displays the port area number. This field is displayed only when portCfgShow is
executed for a single port.