Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 848)

818 Fabric OS Command Reference
53-1003131-01
portDebug
2
portDebug
Sets debug level and verbose level of port modules.
SYNOPSIS
portdebug dbg_lvl, vbs_lvl
DESCRIPTION
Use this command to set the debug level and verbose level of port modules.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
dbg_lvl
Specify the debug level to be set for port modules; valid values are 1 to 5.
vbs_lvl
Specify the verbose level to be set for port modules; valid values are 1 to 5.
EXAMPLES
To set debug level and verbose level of port modules:
switch:admin> portdebug 3 4
SEE ALSO
dbgShow