Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1073)

Fabric OS Command Reference 1043
53-1003131-01
sfpShow
2
•
12 for QSFP
• 13 for QSFP+
OPERANDS
This command has the following operands:
slot
For bladed systems only, specifies the slot number of the port to display, followed
by a slash (/)
port
Specifies the number of the port for which to display the SFP information, relative
to its slot for bladed systems. Use switchShow for a list of valid ports. This
operand is optional; if omitted, this command displays a summary of all SFPs on
the switch.
-link [-force]
Displays the diagnostic information from cached data for a local switch port and
the peer port. The -force option displays the real-time diagnostic information from
the registers for a port.
-f
Refreshes the SFP information. This option is valid only when sfpShow is issued
for a specific port.
-pid pid
Specifies the diagnostics information of a remote switch port along with its peer
port.
-all
Displays detailed data for all available SFPs on the switch. This operand is not
compatible with slot/port operands.
-health
Displays SFP health status information from Fabric Watch for 10 Gbps and 16
Gbps SFPs and for 16 Gbps QSFPs (Quad SFPs). When Fabric Watch
monitoring of SFPs is enabled with the thMonitor command, Fabric Watch
monitors diagnostic SFP parameters such as current, voltage, receiver power,
transmit power, and temperature. When any of these parameters crosses
user-configured low and high thresholds the SFP health state changes Possible
health states include the following:
Green
SPF operates within Fabric Watch thresholds.
Yellow
At least one SFP parameter monitored by Fabric Watch has crossed a low or high
threshold.
No License
The switch does not have a Fabric Watch License
Unknown
This state displays for 8 Gbps, 4 Gbps and 2 Gbps SPF types not supported by
this feature.
Paused
Health monitoring is not enabled on the switch.