Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1260)

1230 Fabric OS Command Reference
53-1003131-01
Command Admin Domain and Virtual Fabrics restrictions
A
Virtual Fabric commands are further constrained by one of the following switch types:
-
All Switches (All) = Command can be run in any switch context.
- Base Switch (BS) = Command can be run only on the base switch.
- Default Switch (DS) = Command can be run only on the default switch.
- N/A = Switch type is not applicable to the command.
• Chassis context (CH) = Command applies to the chassis on which it is executed.
• Switch and Chassis context (VF/CH) = Command applies to the switch and the chassis.
• Disallowed = Command cannot be executed when Virtual Fabrics are enabled.
5. Command-specific: Checks whether the command is supported on the platform for which it is
targeted.
6. Remote Domain Execution: Commands can be executed from a specified remote domain or
logical switch context. In most cases, the Show commands and the commands with show
options are supported.
NOTE
To determine RBAC permissions for a specified command and associated major options,use the
classConfig --showcli command. Refer to
Chapter 1, “Using Fabric OS Commands” for more
information.
Command Admin Domain and Virtual Fabrics restrictions
TABLE 1 Admin Domain and Virtual Fabric restrictions for Fabric OS commands.
Command name Admin Domain Context Switch
type Remote
Domain
Execution
aaaConfig SwitchMember/ Allowed CH N/A Disallowed
ad Allowed/Phys Fabric only Disallowed N/A Disallowed
ag N/A/ Allowed/ SwitchMember VF All Disallowed
agAutoMapBalance N/A VF All Disallowed
agShow Allowed VF All Disallowed
aliAdd Allowed VF All Disallowed
aliCreate Allowed VF All Disallowed
aliDelete Allowed VF All Disallowed
aliRemove Allowed VF All Disallowed
aliShow Allowed VF All Disallowed
appLoginHistory SwitchMember VF All Disallowed
aptPolicy SwitchMember VF All Disallowed
auditCfg SwitchMember CH N/A Disallowed
auditDump SwitchMember CH N/A Disallowed