Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 830)

800 Fabric OS Command Reference
53-1003131-01
portCfgShow
2
To display the inband management interface for a single GbE Port on a Brocade 7800:
switch:admin> portcfgshow mgmtif ge0
Inband Management: ge0 Enabled
Interface IPv4 Address NetMask Effective MTU Flags
--------------------------------------------------------------
0 20.20.0.151 255.255.255.0 1500
Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running
N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp
To display the management route for a configured inband management interface on a Brocade 7800:
switch:admin> portcfgshow mgmtroute ge0
Port: ge0
IP Address Mask Gateway Metric Flags
-------------------------------------------------------------
192.168.1.0 255.255.255.0 20.20.1.250 0
Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static
L=LinkLayer(Arp)
SEE ALSO
portCfg , portCfgAutoDisable , portCfgCreditRecovery , portCfgEport , portCfgFec , portCfgGport ,
portCfgLongDistance , portCfgLport , portCfgNPIVPort , portCfgOctetSpeedCombo , portCfgSpeed ,
portCfgTrunkPort , portSwapDisable , portSwapShow , switchShow