Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 337)

Fabric OS Command Reference 307
53-1003131-01
fcoe
2
--loginshow
Displays information about the devices logged in to the specified FCoE port.
--fcmapset
Configures the FCMAP values for Fabric Provided MAC Addresses (FPMA) for
the specified VLANs.
-vlan vid
Specifies the VLAN for which to set the FCMAP.
fcmapid
Specifies the FCMAP to be set.
--fcmapunset
Unsets the FCMAP for a specified VLAN. Devices previously logged in are
disconnected.
-vlan vid
Specifies the VLAN ID for which the FCMAP is unset.
--fipcfg
Configures FIP multicast advertisement intervals.
-advintvl intvl
Specifies the interval in seconds. The minimum interval value is 0 and the
maximum value is 90. A value of 0 cancels the previous advertisement interval
value. A value of 1 to 90 is valid for changing the interval.
--fipcfgshow
Displays FIP configurations.
--resetlogin
Clears the logins that occurred through a front end port or from a device specified
by the Enode's VN_Port WWN.
-teport [slot/]port
Specifies the slot or port number.
-device wwn
Specifies the device WWN.
EXAMPLES
To display the FCoE ports on the Brocade FCoE10-24:
switch:admin> switchshow -slot 8
switchName: sw0
switchType: 77.3
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 2
switchId: fffc02
switchWwn: 10:00:00:05:1e:75:af:00
zoning: ON (longevity_cfg)
switchBeacon: OFF
FC Router: OFF
Fabric Name: f1_2010_11_16_21_29_26__
Allow XISL Use: OFF
LS Attributes: [FID: 128, Base Switch: \
No, Default Switch: Yes, Address Mode 0]
Slot Blade Type ID Model Name Status
----------------------------------------------------
8 AP BLADE 74 FCOE10-24 ENABLED