Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 552)

522 Fabric OS Command Reference
53-1003131-01
ipSecConfig
2
-id identifier
Specifies the local identifier. The switch is identified by its IPv4 or IPv6
address.
-remoteid identifier
Specifies the peer identifier. The remote peer is identified by its IPv4 or IPv6
address.
-enc algorithm
Specifies the encryption algorithm. Valid encryption algorithms include the
following:
3des_cbc
DES algorithm
blowfish_cbc
Blowfish algorithm
aes128_cbc
AES 128-bit algorithm
aes256_cbc
AES 256-bit algorithm
-hash algorithm
Specifies the hash algorithm. Valid hash algorithms include the following:
hmac_md5
MD5 algorithm
hmac_sha1
SH1 algorithm
-prf algorithm
Specifies the PFR algorithm. Valid PRF algorithms include the following:
hmac_md5
MD5 algorithm
hmac_sha1
SH1 algorithm
-auth psk | dss | rsasig
Specifies the authentication method as one of the following:
psk
Authenticate using preshared keys.
dss
Authenticate using digital signature standard.
rsasig
Authenticate using an RSA signature.
-dh number
Specifies the DH group number as one of the following:
1
Specifies DH group modp768.
2
Specifies DH group modp1024.
14
Specifies DH group modp2048.