Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 281)

Fabric OS Command Reference 251
53-1003131-01
dlsSet
2
EXAMPLES
DLS configuration commands on a switch with an exchange-based policy:
switch:admin> aptpolicy
Current Policy: 3 0(ap)
3 0(ap) : Default Policy
1: Port Based Routing Policy
3: Exchange Based Routing Policy
0: AP Shared Link Policy
1: AP Dedicated Link Policy
switch:admin> dlsshow
DLS is set by default with current routing policy
DLS is set with Lossless enabled
E-port Balance Priority is not set
switch:admin> dlsreset
DLS can not be changed with current routing policy
switch:admin> dlsset
DLS can not be changed with current routing policy
switch:admin> dlsset --enable -lossless
Lossless is set
switch:admin> dlsset --disable -lossless
Lossless is not set
switch:admin> dlssshow
DLS is set by default with current routing policy
E-port Balance Priority is not set
DLS configuration commands on a switch with a port-based policy:
switch:admin> dlsshow
DLS is set by default with current routing policy
DLS is set with Lossless enabled
E-port Balance Priority is not set
switch:admin> dlsreset
DLS is not set
switch:admin> dlsshow
DLS is not set