Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 576)

546 Fabric OS Command Reference
53-1003131-01
licenseIdShow
2
licenseIdShow
Displays the system license ID.
SYNOPSIS
licenseidshow
DESCRIPTION
Use this command to display the license ID of the system.
Some features of the switch and the fabric are optional, licensed products. Without a license installed for
such products, the services provided by these features are not available.
This command displays the system license ID used for generating and validating licenses on the system.
The license ID format consists of eight pairs of hexadecimal values, separated by colons. Each
hexadecimal value is between 00 (0) and FF (255).
NOTES
While the format of this identifier might be similar or even identical to other identifiers in the system, no
inferences should be made about the relationships between them as they are subject to change
independently of one another.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display the license ID:
switch:admin> licenseidshow
a4:f8:69:33:22:00:ea:18
SEE ALSO
licenseAdd , licensePort , licenseRemove , licenseShow , licenseSlotCfg