Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 474)

444 Fabric OS Command Reference
53-1003131-01
fspfShow
2
lsrDelayTo
Link State Record delay time out value in milliseconds.
lsrDelayCount
Counter of delayed Link State Records.
ddb_sem
FSPF semaphore ID.
event_sch
FSPF scheduled events bit map.
NOTES
Beginning with Fabric OS v7.3.0, the output displays only the lines with a bit set. If a port bitmap does not
have any bits set, the output displays as "None" for the first line of the bitmap.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display FSPF protocol information:
switch:admin> fspfshow
version = 2
domainID = 1
switchOnline = TRUE
domainValid = TRUE
isl_ports = None
trunk_ports = None
fports = None
seg_ports = None
active_ports = None
le_ports = None
nbStFullPortsP = None
ve_portsP = None
minLSArrival = 3000
minLSInterval = 5000
LSoriginCount = 0
startTime = 0
fspfQ = 0x111ffba8
fabP = 0x11209bc8
agingTID = 0x11329ae0
agingTo = 10000
lsrDlyTID = 0x1132ac90
lsrDelayTo = 5000
lsrDelayCount = 0
ddb_sem = 0x11209bd8
fabP:
event_sch = 0x0
max port = 200
max phy port = 40
SEE ALSO
bcastShow , topologyShow , uRouteShow