Portshow – Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual

Page 913

Fabric OS Command Reference

883

53-1003131-01

portShow

Displays status and configuration parameters for ports and GbE ports.

SYNOPSIS

portshow [slot/][ge]port

portshow [slot/]port -link [-force]

portshow -i [ index1 [-index2] [...]] [-f]

portshow -pid pid

portshow -x [hex1[-hex2] [...]]

portshow option [slot/]ge_port [optional_args]

portshow option [all | ve_port] arguments
[optional_arguments]

portshow option [all |ge_port] arguments
[optional_arguments]

DESCRIPTION

Use this command to display general port status and specific configuration parameters for a specified
port, GbE port, or VE_Port.

If this command is executed for a specified port with no additional options, it displays general status and
configuration for that port. If executed with optional arguments for a Gigabit Ethernet (GbE) port or
VE_Port, the command displays FCIP-related port configuration parameters specific to the Brocade
7800, Brocade 7840 switches and the Brocade FX8-24 blade.

The behavior of this command is platform-specific. Some command options are not available on all
platforms. Use the following section headings to navigate this page.

•

Display general port status information on all platforms

•

Display IP Interface configurations on the Brocade 7800, 7840, or FX8-24 platforms:

portshow ipif - Displays the local IP interfaces.

portshow arp - Displays the content of the address resolution protocol (ARP) table.

portshow iproute - Displays static routes on the IP interface.

portshow vlantag - Displays the IP interface VLAN configuration.

portshow ipsec-policy - Displays the IPSEC Policy information. Currently supported on
Brocade 7840 switch only.

•

Display FCIP tunnels, circuits, management interfaces and FICON statistics on the Brocade 7800,
7840, or FX8-24 platforms:

portshow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnels.

portshow fcipcircuit - Displays FCIP circuits.

portshow mgmtif - Displays the inband management interfaces.

portshow mgmtroute - Displays the routes for the inband management interfaces.

portShow xtun - Displays FICON and FCP emulation statistics and current runtime conditions.

To display the command usage on the switch, use portShow [action].