Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1119)

Fabric OS Command Reference 1089
53-1003131-01
supportFtp
2
-R
Clears all supportFtp parameters.
-e
Enables auto file transfer. Trace dump files are automatically transferred to a
designated FTP server. The server parameters must be set before you can enable
auto file transfer.
-d
Disables auto file transfer.
EXAMPLES
To set the FTP parameters:
switch:admin> supportftp -s -h 1080::8:800:200C:417A \
-u admin -p password -d support -l sftp
supportftp: ftp parameters changed.
To display the FTP parameters:
switch:admin> supportftp
Host IP Addr: 1080::8:800:200C:417A
User name: admin
Remote Dir: support
Auto Upload protocol: sftp
Auto-FTP: Off
To set FTP parameters interactively:
switch:admin> supportftp -s
Host IP Addr[1080::8:800:200C:417A]:192.168.67.126
User Name[admin]: admin
Password[********]:password
Remote Dir[support]:
Auto upload protocol[ftp]:scp
Auto file transfer parameters changed
To set the time interval at which the FTP server connectivity is checked:
switch:admin> supportftp -t 24
supportftp: ftp check period changed.
To enable auto file transfer:
switch:admin> supportftp -e
support auto file transfer enabled.
To disable auto file transfer:
switch:admin> supportftp -d
support auto file transfer disabled.
SEE ALSO
supportSave , supportShow , traceDump