Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1102)

1072 Fabric OS Command Reference
53-1003131-01
snmpConfig
2
Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]
Priv Protocol [DES(1)/noPriv(2)/AES128(3)/AES256(4)]): (1..4) [2]
Engine ID: [0:0:0:0:0:0:0:0:0]
User (ro): [snmpuser3]
Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]
Priv Protocol [DES(1)/noPriv(2)/AES128(3)/AES256(4)]): (1..4) [2]
Engine ID: [0:0:0:0:0:0:0:0:0]
SNMPv3 trap recipient configuration:
Trap Recipient's IP address : [0.0.0.0]
Trap Recipient's IP address : [10.32.147.6]
UserIndex: (1..6) [2]
Trap recipient Severity level : (0..5) [5]
Trap recipient Port : (0..65535) [162]
Trap Recipient's IP address : [0.0.0.0]
Trap Recipient's IP address : [0.0.0.0]
Trap Recipient's IP address : [0.0.0.0]
Trap Recipient's IP address : [0.0.0.0]
To block access to SNMPv1/2c
switch:admin> snmpconfig --disable snmpv1
switch:admin> snmpconfig --show
SNMPv1 community and trap recipient configuration:
Community 1: ram (rw)
Trap recipient: 172.26.4.84
Trap port: 162
Trap recipient Severity level: 5
Community 2: OrigEquipMfr (rw)
No trap recipient configured yet
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
SNMPv1:Disabled
REFERENCES
Refer to the following publications for further information on SNMP:
• SW_v5_x.mib, "Switch Management Information & Switch Enterprise Specific Trap"
• RFC1157, "A Simple Network Management Protocol (SNMPv1)"
• RFC1213, "Management information Base for Network Management of TCP/IP-based internets:
MIB-II"
•
RFC2574, "User-based Security Model (USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)"
SEE ALSO
None