Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1180)

1150 Fabric OS Command Reference
53-1003131-01
tempShow
2
tempShow
Displays temperature readings.
SYNOPSIS
tempshow
DESCRIPTION
Use this command to display the current temperature readings of all temperature sensors in a switch. For
each sensor, this command displays the sensor ID (an index number), the slot number (if applicable), the
sensor state (OK or absent), and the temperature. The temperature readings are given in both
Centigrade and Fahrenheit.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
Refer to the hardware reference manual for your switch to determine the normal temperature range.
OPERANDS
None
EXAMPLES
To display temperature and status sensors:
switch:user> tempshow
Sensor Slot State Centigrade Fahrenheit
ID
========================================================
1 1 Ok 38 100
2 1 Ok 28 82
3 1 Ok 40 104
4 1 Ok 31 87
5 1 Ok 43 109
6 2 Ok 39 102
7 2 Ok 28 82
8 2 Ok 40 104
9 2 Ok 30 86
10 2 Ok 43 109
SEE ALSO
fanShow , psShow , sensorShow , slotShow