Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1057)

Fabric OS Command Reference 1027
53-1003131-01
secPolicyRemove
2
The following examples illustrate several ways to specify the port values:
(1-6)
Selects ports 1 through 6.
(*)
Selects all ports on the switch.
[3, 9]
Selects ports 3 and 9 and all devices attached to those ports.
[1-3, 5]
Selects ports 1 through 3 and 5 and all devices attached to those ports.
[*]
Selects all ports on the switch and devices currently attached to those ports.
EXAMPLES
To remove a member that has a WWN of 12:24:45:10:0a:67:00:40 from SCC policy:
switch:admin> secpolicyremove "SCC_POLICY", \
"12:24:45:10:0a:67:00:40"
Member(s) have been removed from SCC_POLICY.
To remove a member with SCC policy and HIF enabled:
switch:admin> secpolicyremove "SCC_POLICY" "10:00:00:27:f8:d0:b3:8f"
HIF mode is enabled. About to remove SCC_POLICY member(s).
ARE YOU SURE (yes, y, no, n): [no] y
SEE ALSO
secPolicyAbort , secPolicyActivate , secPolicyAdd , secPolicyCreate , secPolicyDelete ,
secPolicyDump , secPolicySave , secStatsShow