Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 271)

Fabric OS Command Reference 241
53-1003131-01
diagEnablePost
2
diagEnablePost
Enables the power-on self-test (POST).
SYNOPSIS
diagenablepost
DESCRIPTION
Use this command to enable POST. A reboot is not required for this command to take effect. POST
includes two phases: POST Phase I mainly tests hardware and POST Phase II tests system functionality.
Use the diagPost command to display the current POST status, and use diagDisablePost to disable
POST.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To enable POST:
switch:admin> diagenablepost
Config update Succeeded
Diagnostic POST is now enabled.
SEE ALSO
diagDisablePost , diagPost