Shellflowcontroldisable – Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual

Page 1081

Fabric OS Command Reference

1051

53-1003131-01

shellFlowControlDisable

Disables XON/XOFF flow control on the console serial port.

SYNOPSIS

shellflowcontroldisable

DESCRIPTION

Use this command to disable XON/XOFF flow control on the console serial port. Flow control is disabled
by default.

Because this command changes the flow control on the console serial port, it must be executed from a
session that is logged in from the console serial port. This command cannot run from a Telnet session.

This setting is saved in the configuration database; therefore, it is persistent across reboots and power
cycles.

NOTES

On dual-CP systems, a reboot on the standby CP is required for this command to take effect. No action is
required on the active CP.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

None

EXAMPLES

To disable flow control:

switch:admin> shellflowcontroldisable

Disabling flowcontrol

flow control is now disabled