Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 273)

Fabric OS Command Reference 243
53-1003131-01
diagPost
2
diagPost
Displays the diagnostic power-on self-test (POST) configuration.
SYNOPSIS
diagpost
DESCRIPTION
Use this command to display the current POST configuration. Use diagEnablePost or diagDisablePost
to modify the POST configuration.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display the current POST configuration:
switch:admin> diagpost
Diagnostic POST is currently disabled.
SEE ALSO
None