Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 611
Fabric OS Command Reference
581
53-1003131-01
mapsConfig
2
EXAMPLES
To enable MAPS monitoring and set dflt_moderate_policy as the active policy:
switch:admin> mapsconfig --enablemaps -policy
dflt_moderate_policy
To stop monitoring on three ports:
switch:admin> mapsconfig --config pause -type port
-members "3/1,3/2,3/3"
To resume monitoring on two ports:
switch:admin> mapsconfig --config continue -type port
-members "3/1,3/3"
To specify that generating a RASLog and sending an e-mail message are the only allowed notification
actions on this switch:
switch:admin> mapsconfig --actions raslog,email
To configure the e-mail address to which notifications are sent:
switch:admin> mapsconfig --emailcfg -address [email protected]
To send a test e-mail:
switch:admin> mapsconfig --testmail
MAPS test welcome mail sent successfully
To import a flow:
switch:admin> mapsconfig --import fmFlow1
To delete all of the user-defined groups, policies, and rules:
switch:admin> mapsconfig --purge
WARNING: This command will clear all the user-defined MAPS \
configurations and activate the factory defined policy \
and rules.
Do you want to continue? (yes, y, no, n): [no] yes
To display the global MAPS configuration:
switch:admin> mapsconfig --show
Configured Notifications: Raslog, Fence, SNMP, EMAIL
Mail Recipient: [email protected]
Relay Host IP is: 10.10.10.10
Relay Host Domain name: brocade.com
FPI Monitoring: Enabled
Paused members :
===============
PORT : 2/5,3/1-2,3/6
CIRCUIT :
SFP :
SEE ALSO