Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 632)

602 Fabric OS Command Reference
53-1003131-01
msCapabilityShow
2
msCapabilityShow
Displays the Management Server (MS) capabilities.
SYNOPSIS
mscapabilityshow
DESCRIPTION
Use this command to display the supported capabilities of the Management Server for each switch in the
fabric. An asterisk displays next to the name of the local switch.
NOTES
Reliable commit service (RCS) is a fabric-wide capability and is supported only if all the switches in the
fabric support the service.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display the supported MS capabilities for each switch in the fabric:
switch:admin> mscapabilityshow
Switch WWN Capability Switch Name
======================== ========== =======
10:00:00:60:69:20:15:71 0x0000008f "switch1"*
10:00:00:60:69:00:30:05 0x0000008f "switch2"
Capability Bit Definitions:
Bit 0: Basic Config Service Supported.
Bit 1: Platform Management Service Supported.
Bit 2: Topology Discovery Service Supported.
Bit 3: Unzoned Name Service Supported.
Bit 4: Fabric Zone Service Supported.
Bit 5: Fabric Lock Service Supported.
Bit 6: Time Service Supported.
Bit 7: RSCN Small Payload Supported.
Bit 8: Reliable Commit Service(RCS) Supported.
Bit 9: Access Gateway Registration/Discovery Supported.
Bit 10: Administrative Domains(AD) Supported.
Others: Reserved.
SEE ALSO
msConfigure , msPlMgmtActivate , msPlMgmtDeactivate , msTdDisable , msTdEnable ,
msTdReadConfig