Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 815
Fabric OS Command Reference
785
53-1003131-01
portCfgPersistentEnable
2
-i index1[-index2]
Persistently enables a port or a range of ports identified by port index numbers.
You may specify multiple index ranges separated by a space, for example, 33-38
40-60.
-f
Ignores nonexisting ports. This operand is valid only with the -i option.
-slot [slot1[-slot2]
Persistently enables all ports on a slot or on a range of slots, for example, -s 3-5.
Multiple slot ranges are not supported with this command.
-h
Displays the command usage.
EXAMPLES
To enable a single port persistently:
switch:admin> portcfgpersistentenable 2/4
To enable a range of ports persistently:
switch:admin> portcfgpersistentenable 2/4-8
To enable multiple port ranges persistently:
switch:admin> portcfgpersistentenable 2/24-26 3/10-12 4/3-4
To enable a port persistently by specifying its index number:
switch:admin> portcfgpersistentenable -i 176
To enable a range of ports persistently by specifying the corresponding port index range:
switch:admin> portcfgpersistentenable -i 17-18
To enable multiple ports persistently by specifying multiple port index ranges:
switch:admin> portcfgpersistentenable -i 17-18 30-39
To enable all ports on slots 3-5 persistently:
switch:admin> portcfgpersistentenable -s 3-5
To display the persistently enabled ports on the switch:
switch:admin> portcfgpersistentenable
Slot 9 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-------+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---
Enabled YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES
(output truncated)
SEE ALSO
,
,