Watlow Series F4S/D - Manual (Page 38)

How to Edit a Profile
To change one or more parameters in any step of a
profile, choose Edit Profile on the Profiles Page.
1. Go to the Profiles Page.
Move the cursor to Go to Profile (at the bottom
of the Main Page), then press . .
2. Choose to edit a profile.
Press . .
3. Choose the profile you want to edit.
Press . .
4. Choose how you change the profile.
Choose whether you want to insert a new step,
edit a specific step or delete a step.
To edit a step:
• Select the number of the step you wish to edit
from a list of steps and step types.
• The next screen presents a list of all possible
step types. The cursor will be positioned on
the current step type. To keep it, press . and
make your changes to the properties listed on
succeeding screens.
• If you choose to change a Step Type, the Se-
ries F4 will prompt you to program all neces-
sary parameters.
To insert a step:
Move the cursor to the number of the step that
the new step will precede. Press . . The Series
F4 will prompt you to program all necessary pa-
rameters of the new step. Inserting a step
changes the numbers of all steps that follow.
To delete a step:
Move the cursor to the number of the step to be
deleted. Press . . Deleting a step changes the
numbers of all steps that follow.
A Jump Step that jumps to an End Step cannot
be deleted.
✔ NOTE :
Inserting a step changes the numbers of all steps that
follow.
. .
Edit Step:__________
>Step 1 Autostart
Step 2 Ramp Time
■
Step 3 Soak ▼
. .
Choose to:__________
Insert Step
>Edit Step
Delete Step
. .
…Edit Profile_______
>Glaze 42
▲
Glaze 43 ■
Glaze 56
▼
. .
Main>Profile________
Create Profile
>Edit Profile
Delete Profile
4 . 6 ■ P r o f i l e P r o g r a m m i n g Wa t l o w S e r i e s F 4 S / D