Watlow Series F4S/D - Manual (Page 14)

2 . 6 ■ K e y s , D i s p l a y s a n d N a v i g a t i o n Wa t l o w S e r i e s F 4 S / D
How to Enter Numbers and Names
Figure 2.6 — How to Enter Numbers and Names. (F4D shown)
F
4
1
2
i
1B 1B
2A 2A
2B 2B
1A 1A
F 4
1
2
i
1B 1B
2A 2A
2B 2B
1A 1A
1
. Navigate
to the parameter
you want to
name.
You'll change
each letter on
this nameable
10-character
line.
3
. Scroll to choose the new
letter or a number.
2
. Move right or left to choose the character to change.
(The position is underlined.)
Alarm Hysteresis:___
36
° F
Adjusts Value
Save Changes
1
. Navigate
to the parameter
you want to
change.
You'll change
the value on
this line.
Numbers
Names
4
. Press . to enter
the value.
4
. Press . to move to the
end of the 10-character name
space and proceed to the
next screen. This enters the
name.
3
. Scroll to increase or
decrease the value of
the digit.
2
. Move right or left, if necessary, to choose the digit to change.
(Some numbers increase or decrease as single units; others
digit by digit.) The active position is underlined.
Enter Alarm Name:___
A L A R M 1
Adjusts Char
Back Next
If the cursor
is at Z, press
< to go
down to A,
then from 9
to 0. Blank is
on the end.
Z
Y
X
W
…
C
B
A
9
8
7
6
5
4
3
2
1
Ø
Blank
Many parameters require users to enter a numeri-
cal value. Alarms, digital inputs, digital outputs
and profiles can be customized with easily recog-
nized names, such as TOO HOT for an alarm,
DOOR OPEN for a digital input and GLAZE 6 for
a profile.