Watlow Series F4S/D - Manual (Page 13)

Wa t l o w S e r i e s F 4 S / D K e y s , D i s p l a y s a n d N a v i g a t i o n ■ 2 . 5
Guided Setup
In most F4 menus, setup and programming tasks
are guided. For example, once you select Analog
Input 1 on the Setup Page, all parameters neces-
sary to configure that input are linked:
1. Use > < to move the cursor to select an
item in a list.
2. Press the Right Key . .
3. Enter the value and make a choice.
4. Press
. again.
5. Repeat until you return to the original list.
. saves the value and proceeds to the next
parameter in the series.
, saves the value and backs out of the series, and
returns to the Main Page.
For initial setup and programming, we recommend
that you answer all the questions in the series,
entering values for all linked parameters and
pressing . until you return to your starting
point.
To edit a parameter, proceed through the series
without changing values until you find the parame-
ter you want to change. After making the change,
you may back out or proceed to the end of the
series.
✔ NOTE:
The Edit PID Menu (Operations Page) presents lists of
parameters that can be entered and edited individually.
Press either
.
or
,
to enter the value and return to
the list.
✔ NOTE:
Make sure your setup is complete before entering profiles.
Certain analog input setup changes will delete profiles.
.
.
.
.
.
.
,
Save setup changes
or restore values?
▼ Restore ▲ Save
Choose to Setup:____
>Control Output 1A
▲
Control Output 1B ■
Control Output 2A ▼
Enter Lo Power Limit
0%
▲▼ Adjusts Value
< Back > Next
Enter Hi Power Limit
100%
▲▼ Adjusts Value
< Back > Next
Choose Cycle Time:__
>Variable Burst
Fixed Time ■
▼
Choose Function:____
>Heat
Cool
Choose to Setup:____
>Control Output 1A
▲
Control Output 1B ■
Control Output 2A ▼
Main Page___________
Go to Operations
Go to Profiles
>Go to Setup